Top Tips For Maintaining a Hot Water Heater

hot water heater tank

The horror of running out of hot water when in dire need is definitely not a pleasant thought. Undoubtedly, hot water has become a bare necessity in every household, the reasons for which vary from showering to washing miscellaneous items. To avail this necessity at all times, it is important to understand how crucial it is for water heaters to be thoroughly maintained, because the alternative is nothing short of a nuisance in ghastly weather.

If you crave augmented efficiency, life extension, no petty issues, and saving money when it comes to water heaters, regular maintenance of it is vital. And therefore, lets delve into some of the ways you can get the most of out of your hot water heater without needing repair service.

Check for leaks

 A leaking water heater can add up to unnecessary repairing expenses, and a rise in utility bills. To avoid all kinds of relevant inconveniences, a hot water tank should be carefully examined for leakage, excessive rust, or water gathering at the base. In unfavourable circumstances like such, call a professional as soon as possible.

Drain the tank to get rid of sediment

A lot of sediment and foul residue tends to build up along the walls of the tank over time, which needs a proper cleaning every few months, in order to avoid water carrying a vile taste and smell. There’s an easy way to remove all the sediment, for which you need to clear out the tank first. Drain out the water from tank into buckets, and wash up the empty tank with cold water. The process is to be repeated till clear water comes out, and now you can refill the tank and are good for a few months at least.

Check and adjust the temperature

Time and again, you should check your water heater temperature, which should range from 55 to 60 degrees. You can easily adjust the dial using a flathead screwdriver. If you aim to save energy costs, reduce the temperature. If you’re planning on leaving the house for days, it’s best to turn the thermostat down to its lowest setting.

Examine the anode rod 

It is critical to also keep a check on the anode rod. The key is to drain a few gallons of water first, and then insert a 1 1/16-inch socket onto the rod’s hex head on top of the heater and unscrew the rod. Check whether its coated with calcium, or ½ inch thick. In such a case, you would need to insert a new one.

Test the TPR valve

In order to test the temperature-pressure-release valve, place a bucket under the pipe connected to it. Let some water out by lifting the valve’s tab, and then let go. If the water keeps flowing, you will need to install a new one. We recommend Aurora, Colorado water heater installation in the Denver area.

Along with these beneficial tips, it is also important to understand that gas and electric water heaters require different kind of maintenance. The key is to keep the filter, air vent, and spark arrester clean, and you’ve indefinitely got yourself a lasting water heater.

Sharing is caring!